Zetec SE or Sigma Billet Steel Oil Pump Gear Set
Zetec SE or Sigma Billet Steel Oil Pump Gear Set
£195.00
New Billet steel oil pump gear set to suit the Ford Zetec SE, Sigma and TI VCT engines.
CNC machined from EN24 steel, heat treated and super finished to make them stronger and more reliable.
Fits into a standard oil pump without the need for any modifications, replacing the standard fragile sintered metal gears. Shock caused by high RPM or rapid changes in revs can shatter the OEM oil pump gears causing engine failure. Can be fitted to used or brand new oil pumps.
Suitable for high revving engines, eliminating the need for a dry sump system.
* Not suitable for Zetec E or Zetec SE 1.7 engines
Specification and Application
| Component | Billet Steel Oil Pump Gear Set |
| Type | EN24 steel heat treated |
| Engines * | Ford Zetec SE (Sigma) * 1.4, 1.5 &1.6 Litre Ford TI VCT |
| Applications | Any conversion using one of the above engines |
Additional information
| Weight | 1 kg |
|---|
Related Products
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking PlateThis aluminium blanking plate replaces the standard exhaust gas recirculation (EGR) valve on all Duratec engines. It improves engine power and assists engine tuning by allowing the engine to use fresh oxygen for the combustion process instead of using recirculated exhaust gas. Simply remove the existing exhaust gas recirculation valve and replace with the blanking plate using silicon gasket sealant. Image shows blanking plate on right and original exhaust gas recirculation valve on left.
Duratec Water Manifold
Duratec Water ManifoldDesigned to simplify the cooling system when used in a longitudinal engine position. The depth from the rear cylinder head face is 60mm. Incorporates heater outlet. Comes with temperature gauge sender.
Products that you might find interesting
TTV twin plate 7 1/4″ (184mm) paddle clutch
TTV twin plate 7 1/4″ (184mm) paddle clutchTTV Racing Twin Plate Race Clutch 184mm (7.25″)
Toyota 4AGE to Ford Gearbox Bellhousing
Toyota 4AGE to Ford Gearbox BellhousingThis bellhousing will mate the Toyota 4AGE engine, in either 16 valve or 20 valve format, to the Ford Type E (Rocket) 4 speed or Ford Type 9 (Sierra) 5 speed gearbox.
Duratec Water Manifold
Duratec Water ManifoldDesigned to simplify the cooling system when used in a longitudinal engine position. The depth from the rear cylinder head face is 60mm. Incorporates heater outlet. Comes with temperature gauge sender.
Duratec Underdrive Pulley 146mm Trigger Wheel
Duratec Underdrive Pulley 146mm Trigger WheelReplaces the standard crank pulley on 2.0 and 2.3 litre Duratec engines for higher revving competition engines. Save valuable horsepower by avoiding over-spinning belt driven ancillaries.
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate2.0 or 2.3 Ford Duratec lightweight steel flywheel to suit Twin plate 7 1/4″ paddle clutch. With integral starter ring (ring gear is machined into the flywheel)
16 Valve Astra Inlet Manifold
16 Valve Astra Inlet ManifoldTo convert 16 Valve Astra 2.0XE engine to twin Weber 40 or 45 carburettors. Studs & nuts included. Cosworth type mount ‘o’ ring plates not included.
* Please note that the manifold is only compatible with 0 degrees mounted engines, not 7 degree standard angle.
