Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
£318.32
Honda K20 lightweight steel flywheel to suit standard clutch cover and plate. With integral starter ring (ring gear is machined into the flywheel)
Download a Fitting Guidance Notes document.
Specification and Application
| Component | Lightweight Steel Flywheel |
| Type | Replaces standard flywheel Integral starter ring |
| Weight | 3.2Kg |
| Engines | Honda K20 or K24 |
| Clutches | Use with our Honda K20 and K24 Heavy Duty Clutch Cover and Friction Disc Kit |
| Starter Motor | Honda K20 |
| Applications | Kit Cars Rally/Race – MkI/II Escort, Sierra, Lotus Cortina Drift Cars Classic Ford Fast Road |
Note:
You are able to use standard bolts with this flywheel but you will need to shorten them slightly so that they don’t bottom out when you tighten them (due to thinner flywheel face).
Please see the Honda K20 Engine page for more information.
Additional information
| Weight | 2.9 kg |
|---|
Related Products
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot Bearing
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot Bearing
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot Bearing
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot BearingConverts crankshaft to accommodate the Ford Type 9 Gearbox in a RWD installation. Needed in order to support the longer length of the Ford Type 9 gearbox input shaft. Fits in the standard recess in crankshaft.
Hydraulic Heavy Duty Release Bearing
Hydraulic Heavy Duty Release BearingConcentric heavy duty release bearing. The slave cylinder inlet and bleed should be located vertically and the hydraulic clutch pipe routed through 2 holes drilled in the best location within the bellhousing flange for your application.
Honda K20 Heavy Duty Clutch Cover and Friction Disc Kit
Honda K20 Heavy Duty Clutch Cover and Friction Disc Kit
Honda K20 Heavy Duty Clutch Cover and Friction Disc Kit
Honda K20 Heavy Duty Clutch Cover and Friction Disc KitThis high quality heavy duty clutch kit kit includes an uprated clutch cover,retaining bolts and friction disc
Honda K20 and K24 to Ford Type 9 Bellhousing
Honda K20 and K24 to Ford Type 9 BellhousingThis bellhousing will mate the Honda K20 or K24 engine to the Ford Type 9 gearbox, Ford 4 speed or any sequential gearbox that uses the Ford Type 9 pattern.
Products that you might find interesting
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard CoverVauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and standard Vauxhall cover. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate and the standard Vauxhall cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
VW / Audi Lightweight Steel Flywheel
VW / Audi Lightweight Steel FlywheelVolkswagen / Audi lightweight steel flywheel to suit standard diameter VW / Audi clutch cover. Designed to replace the OE flywheel. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel.
Vauxhall XE ARP Flywheel Bolt Set
Vauxhall XE ARP Flywheel Bolt SetFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate2.0 or 2.3* Ford Duratec lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. With integral starter ring (ring gear is machined into the flywheel).
Ford X/flow Lightweight Steel Flywheel
Ford X/flow Lightweight Steel FlywheelFord X-flow lightweight steel flywheel to suit Ford 7 1/2″ Clutch Plate. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford X-flow 7 1/2″ cutch plate and clutch cover. For the Lotus sunbeam choose the 8 1/2″ option*.
Upsell Products
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch Plate
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch Plate
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch Plate
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch PlateHonda K20 lightweight steel flywheel to suit Twin plate 7 1/4″ paddle clutch. With integral starter ring (ring gear is machined into the flywheel)
