Heavy Duty Pinto Clutch Cover and Organic Clutch Plate
Heavy Duty Pinto Clutch Cover and Organic Clutch Plate
£399.00
This high quality heavy duty clutch kit kit includes an uprated clutch cover, release bearing and friction disc
Specially made for RWD Motorsport. Comprising a heavy duty aluminium clutch cover, retaining bolts, bearing and heavy duty clutch friction disc. Direct replacement for the difficult to get hold of AP Racing clutch cover CP2511-1 and clutch disc CP5351-1.
Please note that if you are using this clutch with the Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing or Ford Type 9 Hydraulic Release Bearing Kit or Borg Warner T5 Hydraulic Release Bearing Kit since this clutch is 10mm less in height you will need to order 2 x Hydraulic Release Bearing Kit Additional 5mm Shims. Please read the Fitting Instructions for more information and before final build.
Suitable for use with any Ford Type 9 or 4 speed gearbox and engine combination including:
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing (if using Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate)
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing(if using Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate)
Pinto or Cosworth to Borg Warner T5 Bellhousing
RS2000 Type Bellhousing (cable clutch)
Sierra Direct Replacement Cable Clutch Bellhousing
Sierra Direct Replacement Hydraulic Clutch Bellhousing
VW / Audi 1.8 Litre to Ford Type 9 Bellhousing
Specification and Application
| Components | Heavy Duty Aluminium Clutch Pressure Plate Heavy Duty Organic Clutch Plate Release Bearing Clutch Cover Cap Head Bolts |
| Clutch Torque Capacity | 280 ft lb / 380 Nm |
| Clutch Friction Disc Thickness | 0.314″ / 8.0mm |
| FrictionDisc Diameter | 8.5″ / 215mm |
| Splines | 23 |
| Input Shaft Diameter | 1″ or 25.4mm |
| Height from crankshaft face to clutch diaphragm fingers | 58mm |
| Height from crankshaft face to clutch diaphragm fingers when worn | Approximately 62mm |
| Compatible Lightened Flywheels | Ford Duratec Lightweight Steel Flywheel – 8 1/2″ Clutch Plate Ford Zetec E Lightweight Steel Flywheel Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate Ford Zetec SE / Sigma Lightweight Steel Flywheel Pinto Clutch |
| Gearbox | Ford 4 speed (rocket) Ford Type 9 Borg Warner T5 * Borg Warner T5 information |
| Applications | Kit cars Rally / race Fast road |
* SIerra Cosworth 23 spline 1″ input shaft only
Additional information
| Weight | 4.5 kg |
|---|
Related Products
Ford Zetec E Lightweight Steel Flywheel
Ford Zetec E Lightweight Steel FlywheelFord Zetec E * lightweight steel flywheel to suit standard 220mm diameter Zetec E clutch cover and Ford 8 1/2″ clutch plate or Ford Pinto 8 1/2″ clutch plate and cover (comes pre-drilled to suit either option). Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original, this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch PlateFord Pinto lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate2.0 or 2.3* Ford Duratec lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. With integral starter ring (ring gear is machined into the flywheel).
Products that you might find interesting
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction PlateHeavy duty organic clutch plate by RWD Motorsport. Fits Pinto applications and our Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
Recommended to be used together with our RWD Motorsport Heavy Duty Clutch Cover.
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung Centre
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung Centre
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung Centre
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung CentreHeavy duty Toyota 190mm clutch friction disc with a 28mm diameter 21 spline centre hub.
RWD Motorsport Heavy Duty Pinto Clutch Cover
RWD Motorsport Heavy Duty Pinto Clutch CoverHeavy duty organic clutch cover assembly by RWD Motorsport. Fits our Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate and Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
TTV twin plate 7 1/4″ (184mm) paddle clutch
TTV twin plate 7 1/4″ (184mm) paddle clutchTTV Racing Twin Plate Race Clutch 184mm (7.25″)
8 1/2″ Clutch Cover and Friction Disc
8 1/2″ Clutch Cover and Friction DiscThis high quality original equipment kit includes a standard clutch cover and friction disc.
8 1/2″ Clutch Cover and Toyota W Series Spline Friction Disc
8 1/2″ Clutch Cover and Toyota W Series Spline Friction Disc
8 1/2″ Clutch Cover and Toyota W Series Spline Friction Disc
8 1/2″ Clutch Cover and Toyota W Series Spline Friction DiscThis high quality kit includes a standard clutch cover and Toyota W Series spline 8 1/2″ (215mm) friction disc.
