Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
£250.00
2.0 or 2.3* Ford Duratec lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. With integral starter ring (ring gear is machined into the flywheel).
Download a Fitting Guidance Notes document.
Please see our Ford Duratec Engine page for more information.
Specification and Application
| Component | Lightweight Steel Flywheel |
| Type | Replaces incompatible standard dual mass flywheel Integral starter ring |
| Weight | 4.2Kg |
| Diameter | 290mm total diameter including starter ring gear |
| Crank face to clutch face | 16mm |
| Engines | Ford Duratec HE |
| Clutches | Recommended Ford Clutch Cover and Friction Disc for fast road up to 150bhp Heavy Duty Pinto Clutch Cover and Organic Clutch Plate for power greater than 150bhp or competition use. |
| Starter Motor | Ford Mondeo or Focus model number 1S7U 11000 AD or Duratec Starter Motor |
| Applications | Kit Cars Rally/Race – MkI/II Escort, Sierra, Lotus Cortina Classic Ford Fast Road |
* Please note that some Duratec 2.3 donor vehicles such as the Ford Ranger use a larger 116 teeth flywheel. The starter motor from these vehicles are not compatible with the smaller 112 tooth flywheel as they have a 10mm greater offset. Please use the standard Ford Mondeo or Focus starter motors
Note: You are able to use standard bolts with this flywheel but you will need to shorten them slightly so that they don’t bottom out when you tighten them (due to thinner flywheel face). Alternatively and for added security choose our Duratec ARP flywheel bolt set.
Additional information
| Weight | 4 kg |
|---|
Related Products
Heavy Duty Pinto Clutch Cover and Organic Clutch Plate
Heavy Duty Pinto Clutch Cover and Organic Clutch Plate
Heavy Duty Pinto Clutch Cover and Organic Clutch Plate
Heavy Duty Pinto Clutch Cover and Organic Clutch PlateThis high quality heavy duty clutch kit kit includes an uprated clutch cover, release bearing and friction disc
Duratec ARP flywheel bolt set
Duratec ARP flywheel bolt setFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch PlateFord Pinto lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction PlateHeavy duty organic clutch plate by RWD Motorsport. Fits Pinto applications and our Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
Recommended to be used together with our RWD Motorsport Heavy Duty Clutch Cover.
RWD Motorsport Heavy Duty Pinto Clutch Cover
RWD Motorsport Heavy Duty Pinto Clutch CoverHeavy duty organic clutch cover assembly by RWD Motorsport. Fits our Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate and Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
8 1/2″ Clutch Cover and Friction Disc
8 1/2″ Clutch Cover and Friction DiscThis high quality original equipment kit includes a standard clutch cover and friction disc.
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a hydraulic clutch.
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch.
Products that you might find interesting
Ford Zetec E Lightweight Steel Flywheel
Ford Zetec E Lightweight Steel FlywheelFord Zetec E * lightweight steel flywheel to suit standard 220mm diameter Zetec E clutch cover and Ford 8 1/2″ clutch plate or Ford Pinto 8 1/2″ clutch plate and cover (comes pre-drilled to suit either option). Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original, this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch BellhousingDuratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a hydraulic clutch.
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutch
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutch
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutch
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutchSmaller 9 bolt flywheel to suit Pinto 8 1/2″ clutch. This will fit inside our bellhousings and will accept any Ford 8 1/2″ clutch.
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch PlateHonda K20 lightweight steel flywheel to suit standard clutch cover and plate. With integral starter ring (ring gear is machined into the flywheel)
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch BellhousingThis bellhousing allows the Vauxhall 2.0XE Engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch.
Vauxhall 16v Ecotec (C18XE and X20XE) Lightweight Steel Flywheel Standard Cover
Vauxhall 16v Ecotec (C18XE and X20XE) Lightweight Steel Flywheel Standard Cover
Vauxhall 16v Ecotec (C18XE and X20XE) Lightweight Steel Flywheel Standard Cover
Vauxhall 16v Ecotec (C18XE and X20XE) Lightweight Steel Flywheel Standard CoverVauxhall 16v Ecotec (C18XE and X20XE) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and standard Vauxhall cover. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate and the standard Vauxhall cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
Upsell Products
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate2.0 or 2.3 Ford Duratec lightweight steel flywheel to suit Twin plate 7 1/4″ paddle clutch. With integral starter ring (ring gear is machined into the flywheel)
