Free Delivery
Free shipping on all order
Online Support 24/7
Support online 24 hours a day
Money Return
Back guarantee under 7 days
Member Discount
Onevery order over $120.00
Computer & Laptop
Bestseller Products
Honda K20 and K24 to Ford Type 9 Bellhousing
Honda K20 and K24 to Ford Type 9 Bellhousing£367.50Select options
Honda K20 and K24 to Ford Type 9 Bellhousing
Honda K20 and K24 to Ford Type 9 BellhousingThis bellhousing will mate the Honda K20 or K24 engine to the Ford Type 9 gearbox, Ford 4 speed or any sequential gearbox that uses the Ford Type 9 pattern.
£367.50Select options
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing£168.00Select options
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch BellhousingThis bellhousing allows the Vauxhall 2.0XE Engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch.
£168.00Select options
Spigot bearing
Spigot bearingConverts crankshaft to accommodate a RWD gearbox. Needed in order to support the longer length of the Type 9 or Borg Warner T5* input shaft. Fits in standard recess in crankshaft.
* With 15mm spigot
Plumbing Kit for Type 9 or T5 Hydraulic Release Bearing
Plumbing Kit for Type 9 or T5 Hydraulic Release BearingPlumbing Kit for Type 9 or T5 Hydraulic Release Bearing
Plumbing Kit for Type 9 or T5 Hydraulic Release BearingConnects our Ford Type 9 Hydraulic Release Bearing Kit or Slave Cylinder for Duratec Engine to Ford Gearbox Hydraulic Clutch to your car’s pedal box. Comes with fittings and enough pipe to allow the bleed nipple to be situated remotely.
Ford Type 9 Hydraulic Release Bearing Kit
Ford Type 9 Hydraulic Release Bearing Kit£170.00Select options
Ford Type 9 Hydraulic Release Bearing Kit
Ford Type 9 Hydraulic Release Bearing KitThis kit utilises a concentric release bearing and aluminium boss, replacing the standard gearbox nose. The kit comes completed with replacement seal and fixings. The slave cylinder inlet and bleed should be located vertically and the hydraulic clutch pipe routed through 2 holes drilled in the best location within the bellhousing flange for your application.
£170.00Select options
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot Bearing
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot BearingHonda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot Bearing
Honda K20 and K24 Engine to Ford Type 9 Gearbox Gearbox Spigot BearingConverts crankshaft to accommodate the Ford Type 9 Gearbox in a RWD installation. Needed in order to support the longer length of the Ford Type 9 gearbox input shaft. Fits in the standard recess in crankshaft.
RS2000 Clutch Release Fork
RS2000 Clutch Release ForkHigh quality UK manufactured RS2000 clutch release fork.
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing£240.00Select options
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch.
£240.00Select options
Ford Clutch Alignment Tool
Ford Clutch Alignment ToolClutch alignment tool for the 8.5″ Xflow and Pinto clutches. Also suitable for the 240mm Cosworth clutches with the 1″ x 23 spline input shaft.
RS2000 Clutch Release Bearing
RS2000 Clutch Release BearingGenuine Ford RS2000 clutch release bearing. Will fit most Ford Pinto, Vauxhall XE or Zetec installations. 34mm (1.36″) internal diameter *
* Please note that some USA derived Borg Warner T5 gearboxes have an outside diameter of the release bearing tube of 1.43″. In this instance you will need to mill the release bearing tube down to slightly less than the 34mm (1.36″) internal diameter of the RS2000 clutch release bearing